Help us make more EmbalVERT and put less plastic in the oceans and landfill

Help us to say "goodbye plastic film", and "Hello Embal'VERT"

Project visual Help us make more EmbalVERT and put less plastic in the oceans and landfill
Successful
250
Backers
03/17/2019
End date
€12,405
Out of €12,020
103 %
Supported by
Zéro Déchet : l'appel à projet qui ne gaspille rien  supports the project Help us make more EmbalVERT and put less plastic in the oceans and landfillMeetPro supports the project Help us make more EmbalVERT and put less plastic in the oceans and landfill

Help us make more EmbalVERT and put less plastic in the oceans and landfill

Louise and Alastair have discovered how to produce an eco-.friendly alternative to plastic food wrap.

Its made with love in the French Pyrenees with organic cotton, our own beeswax, organic Jojoba oil and Pine Resin.

 

We use only Hydroelectricty in the production of Embal'Vert from one of the landowners where we keep our bees, who has a hydroelectric generator on the river Saison

 

Embal'vert is currently made in our kitchen, and we have now outgrown this and need a workshop to supply demand.

We have an old barn dating from 1700 that will make a great workshop, and we have made a start on it but we need help to get it finished and kitted out.

Each Embal'Vert is currently made by hand, and Louise can't keep up!  We need a custom made stainless steel roller system with a heated bath, so we can treat a whole roll of 50m in one go. This will save time, and allow us to make enough Embal'Vert to really start making a difference in reducing plastic waste. for this we are looking to raise 8,020 euros

 

Our dream is to have our own solar power stored on site in batteries and used to run the workshop and use this electricty to power an electric vehicle for deliveries and travel to and from exhibitions and markets.

We are helping the Planet with our beekeeping, 

Please help us make more 'Embal'Vert so we can help more.

Allocation of funds

I have to admit to being a complete beginner at crowd funding, and to some extent social media, so I have little idea how many people this appeal will reach, or how many people will be sympathetic enough with our aims, to help us. However, it wasn’t that long ago I was a complete beginner at bee keeping, living in France, and being a Father, so here goes!!!!

 

It’s been explained to me that we should have low targets that increase in steps as each level is reached. But, its been explained that if I put in to much detail, it will be boring

So here is my shopping list

1.  honey spinner

 

 

 

 

 

 

2. stainless de-capping trough. 

 

 

Step 2

 

Transformation of barn built in 1750 into a workshop

 

For wax and honey spinning, we need a bee-proof room, and we currently use our kitchen for this.

 

Here is the barn, ready to start work

 

 

This is our current storage space!!

 

 

Spinner                                                                                           1600 euros

De-capping trough                                                                              650 euros              

Concrete floor and entry ramp                                                           3000 euros

intenal walls and ceilings                                                                  2200 euros

fiittng out, including electricty, water, waste, lighting ventilation,            1 290 euros

moveable workbench                                                                         560 euros

We will need new barn doors                                                             1870 euros

Plus internal doors between the clean room and storage space             950 euros

 

Total                                                                                                12 120 euros

 

The remaining part of the building will allow us to store empty hive parts, and our market stand and tables, which currently are outside under the hanger.

So, the barn is now funded...what’s next??

 

Step 3..Fabrication machine

 

Currently Louise receives bolts of material that are 1.5m wide and folded around cardboard formers.

This needs to be cut into the 4 different widths, then each one is ironed, as the folding on the bolts causes creasing.. This is a very labour intensive operation, and we now can’t keep up with demand like this

We need a machine to automate this process. A prototype needs to be designed and made, probably in stainless steel.

 

Jean Marie is the Dad of one of Charlie’s friends at school, he runs a steel fabrication and agri-mechanic service, and he is confident he can build us the machine that will automate the coating of the cotton, and enable us to increase output 50 or 60 fold.

Fabrication machine                                                                                  3 800 euros.

I can't show a picture here, as its not been made yet, but we imagine it will be about 3 m long and 60 cm wide, with a electric motor to pull the material through the hot wax mixture

 

Total raised to here                                                                                     11 920

Wow!  Take a big, deep  breath, and lets go even further.....

 

Step 4 Zero CO2 deliveries

The next stage takes our ecology stance a big step forward, we want to produce and supply Embal’VERT in an eco friendly manner. We have already switched our electricity supplier to Christine.

Christine kindly lets me place my hives on her land to harvest honey from her common lime trees. On the same land she has a hydroelectric station dating back to 1920...So all the electricity we use to make Embal’VERT comes from Christine’s hydroelectricity, brilliant!

 

So, Embal’VERT is produced with zero co2, or carbon neutrally. However, we would love to deliver Embal’VERT without any co2 produced as well, so a 100 % electric vehicle is the next step..  A Kia Niro electric car

would give us a range of 380 km for deliveries, and local exhibitions.

 

Electric car                                                                                                45,000 euros.

 

The Final step!!! Can we get there?

 

Roof tiles and power Wall!

Using Christine’s hydroelectric power, with no CO2 emissions is a great step forward, however, moving electricity from one place to another involves electrical power losses, so it is much more efficient to generate the electricity where you need to use it.

It’s much more efficient to store your electricity in batteries on your property, use as necessary, and sell any excess to the electricity company .

To be self sufficient in electricity for our workshop, and to produce sufficient excess to power a 100% electric delivery vehicle , we will need solar panels ( or solar tiles are now available ),

 

plus a battery similar to a Tesla “Power wall”

.

Solar panel installation                                                                                21,500

Power wall battery installation                                                                       7 360

 

So our help ladder goes like this............

 

Barn fitting out                                                                              12 120

Fabrication Machine                                                                       3 800

Electric delivery car                                                                       45 000

Solar Roof Panels                                                                          21 500

Wall Battery                                                                                   7 360

Total Required                                                                              89 780

 

 

 

 

So, now its in your hands, and the hands of your contacts...Many thanks!!

 

 

Choose your reward

Make a donation

Give what I want